Colloidal silver results when the molecular structure of silver is changed. The substance is then suspended in a liquid solution.
Colloidal silver has been made easy to produce at home. Now home owners can make their own batch of colloidal silver following a few simple procedures and make use of it for various medicinal purposes.
supplies for colloidal silver
In order to make CS at home you need to obtain a certain amount of pure silver. In this case two silver coins would suffice. Along with this you will also require a six volt transformer and two alligator clips.
Other items that you will require include around two feet of neoprene tubing, an oxygenation bubbler, an air tight container and a glass quart jar.
Producing colloidal silver
Step 1
In order to derive the purest form of colloidal silver all equipment including the silver coins must be given a thorough cleaning.
Step 2
The DC connector needs to be plugged off at the end of the transformer wire. However the other end that goes into the wall should be left as it is.
After taking about one inch of the insulation off you need to separate the wires from the strip making sure that the wire in it self is not damaged during the process.
Stage three
When you have the bare wires you will connect them to an alligator clip. You can either crimp them or solder them in order to secure them in the proper place.
The silver coins come into action next. In this case the silver coins will be your two silver electrodes. You will need to clamp both these coins on opposite ends of the glass jar just alongside the alligator clamps.
4th step
The neoprene tube needs to be laid on the bottom surface of the jar containing the silver coins. Fill the jar up to the 8 oz mark making sure the water level comes up the lower end of the clips.
It is important to ensure that the water is stopped before it rises up to the metal as only the coins need to be submerged in the distilled water.
5th step
Next up the oxygenation units and transformers need to plugged in and the water should be left to bubble for up to five hours.
Step 6
After the time has passed safely detach the units and remove the coins. Make sure you thoroughly clean off any residue left from the process.
These coins should be stored away safely as they are good enough to be used again. The two coins can help you to make greater quantities of colloidal silver than you will ever require.
In order to purify the colloidal silver it should be siphoned into an air tight bottle with the tubing.
Adhere to the above mentioned guidelines to make as much colloidal silver with ease at home.